Stick-On Fitting Guide

1. Clean the top of the door frame where the deflector will sit with the alcohol wipe, and let it dry completely.
2. Hold the deflector in place without removing the tape backing, and mark where it lines up.
3. Peel back only the ends of the tape backing and fold them outwards.
4. Line the deflector up, press the ends down, then pull out the rest of the backing while pressing along the full length.
5. Press firmly along the whole deflector for 30 seconds.
6. Don't wash the car or open the windows at speed for 48–72 hours while the adhesive cures.

Best fitted in the dry, above 15°C.