Most deflector sets fit in about five minutes per door, with no drilling. Find your deflector type below.
- In-channel – slides into the window channel
- In-channel with clips – 2.6 mm sets held with small metal clips
- Stick-on (out-channel) – attaches with automotive adhesive tape
- Stick-on with push pin – adhesive tape plus a push pin at the end
Before you start
- Check each deflector against the door before fitting – front and rear, left and right are different.
- Clean the area with the alcohol wipe or a little rubbing alcohol and let it dry.
- Fit in the dry, ideally above 15°C, so tape and plastic behave as they should.
Stuck? Contact us and we'll talk you through it.